Wynns Carbon Buster 200ml
R85.00
Activated foam de-carbons hard to reach engine parts restoring performance and functionality by dissolving carbon, gum, lacquer, tar and varnish deposits. Applications include EGR Valve, Turbo Compressor, Intake Manifold and Valves, ?Off-vehicle? DPF and Parts
- Cleans combustion chambers removing carbon deposits
- Cleans and unblocks Turbo compressor
- Cleans EGR valve and Intake manifold
- Cleans DPF and components
Compatible with Petrol & Hybrid petrol, Diesel & Hybrid diesel engines.
Reviews (0)
Related products
Wynns Fuel Stabiliser 175ml
Wynn?s Fuel Stabiliser is a petrol & diesel fuel additive to prevent fuel from degrading when a vehicle is not in use for extended periods of time, or when stored. Ideal for recreational vehicles, generators, mowers, boats, bikes, emergency equipment classic and hybrid cars, etc
Prevents fuel degradation and facilitates easy starting
Protects against rust and corrosion
Prevents fuel tank and filter deposits
Wynns Engine Flush 375ml
Superior flushing fluid additive to be used before an oil change. Wynn?s Engine Flush, is fast acting and provides extra wear protection while dissolving sludge and oil deposits with a unique anti-wear additive. Flush after just 15 minutes or continue activation for up to 200km?s while you drive. Engine Flush will remove sticky deposits from the pistons rings restoring compression as well as clean out oil channels and galleries to ensure complete lubrication of all working components when oil is replaced
Cleans engines internally while providing anti-wear protection
Frees sticky piston rings, hydraulic valve lifters, and variable timing systems
Removes lacquer, varnish & sludge deposits from the crankcase
Restores compression
petrol & diesel engines
Wynns Cylinder Block Sealant 325ml
Wynn?s Cylinder Block Seal repairs cracks in cylinder block with ease and efficiency. This product can be used to seal small to large cracks. The application varies per type.
Repairs cracks in cylinder blocks in 30 min without dismantling.
Repairs cracks and leaks in head gaskets (metal only).
High Pressure and vibration resistant. Directions for use:
? Normal treatment
Replace old liquid by water. Add Wynn?s Cooling System Flush to the water. Let the
engine run for 15 min. Drain this mixture and rinse with water. Refill system with
water. Remove the upper radiator hose and the thermostat. Shake the bottle of
Wynn?s Cylinder Block Seal before use. In cold temperatures, warm the bottle. Pour
Wynn?s Cylinder Block Seal into the opening of the removed thermostat (325 ml treats
circuits up to 8 litres). Replace the dismantled parts to close cooling system again
(thermostat is NOT replaced). Top up liquid level with water. Warm up engine. After
warm-up let the engine run for at least 15 to 20 minutes. Check water temperature
Wynns Diesel Treatment 375ml
Diesel Treatment is the complete Diesel additive to maintain best performance in all conditions.
Cleans Injectors, reduces soot emissions and keeps EGR and DPF systems clean with Cerium Technology, Biocide kills algae and micro-organisms, flow improver prevents diesel waxing to well below freezing point. Added lubricity extends injector life and lubricates fuel pump. Assists with water
separation by demulsifying the fuel and water for easy and complete removal through the water trap.
Cleans injectors, turbo, EGR valve and diesel particulate filter (DPF)
Kills micro-organisms and algae associated with diesel tank contamination
Lubricates injector increasing efficiency and extending injector life
Prevents diesel freeze and filter clogging in cold temperature environment
Wynns Oil System Flush 375ml
Wynn?s Oil System Flush is specifically developed to meet the latest Euro spec vehicle and oil demands, performing complete oil system cleaning from the sump through to the narrow oil galleries and channels, preparing the entire system for optimal performance when the new oil is added.
Complete oil system flushing
Anti-wear additives protect moving parts
Water emulsifier removes harmful moisture from the system
Compatible in petrol or diesel engines
Wynns Stop Smoke 500ml
An oil additive formulated specifically to reduce exhaust emissions (typically blue or black smoke) caused by oil burning through the combustion chamber, commonly known as blow-by smoke.
Stop Smoke is a highly effective Viscosity Index Improver providing superior thermal stability to the engine oil, preventing seepage past the piston rings.
Suggested for high mileage or vehicles using excessive amounts of oil between service intervals.
Compatible with wet clutch motorcycles when used at 5% per volume.
Catalytic converter safe.
Reduces exhaust smoke
Reduces oil consumption in engines with considerable wear
Improves compression and prevents blow-by by sealing the piston rings
Restores oil pressure
Wynns Revive 375ml
Wynn?s Revive paintwork renewer, is a burnishing compound with abrasive particles which remove faded,discoloured paint and scratches.
Revive removes years of grime and oxidation in minutes.
Abrasive polish to restore faded paintwork
Prepares paintwork for new polish by removing wax build-up
Not recommended for metallic finishes
Removes stubborn dirt and scratches
Reviews
There are no reviews yet.